Tag Archives: royal blue

Celebrating the Oscars of 2018 with some of our Favorite Fashion moments

The Oscars are always a Fashion phenomenon to watch, the jewels the beautiful couture gowns, the gorgeous actresses.  Here are some of our favorites from last nights 90th Academy Awards.

From the Royal Blue bold Color of Jennifer Garner wearing Atelier Versace to Gal Gadot – Wonder Woman in bold metallic Givenchy, Allison Janney wins in Red Reem Acra for her role in I Tonya, Jennifer Lawrence presents in gold Dior, Mira Sorvino statement making in stunning Romona Keveza.

A wonderful night of glamour, movies and fashion, congratulations to all the

winners !

Gal Gadot In Givenchy

Gal Gadot In Givenchy

Mira Sorvino in Romona Keveza

Mira Sorvino in Romona Keveza

Jennifer Garner in Atelier Versace

Jennifer Garner in Atelier Versace

Allison Janney in Reem Acra

Allison Janney in Reem Acra

Jennifer Lawrence in Dior

Jennifer Lawrence in Dior


Posted in Blog, Press | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , | Comments Off

Iolite Gemstone on a Rise, See Mina D Jewelry Iolite Picks

Iolite has long been a favorite of designer Mina Deutsch in her Mina D Jewelry collections.

Mina loves everything blue and oceanesque and uses many shapes and cuts of Iolite in her Calming Blue, Ocean Dreams and Royal Blue Collections.

This article was just published in National Jeweler Magazine and gives us a background and understanding to this wonderful gemstone. pearl-bracelet

New York–It is said that iolite dates back to the time of the Vikings, who would use the stone to guide them on their journeys.

Using thin slices of iolite could help them determine the exact location of the sun when they were out exploring, helping them travel safely to the new world and back again.

Despite its long history, the gem, valued for its vivid, saturated hues ranging from violet to blue, is still less well-known than stones like tanzanite and sapphires.

According to the Gemological Institute of America’s Gem Encyclopedia, gem experts believe that this could be because designers and retailers haven’t seen a consistent enough supply in a uniform fine quality to consider investing in large quantities for themselves.

Stuart Robertson, research director for Gemworld International, Inc., said that it’s difference in popularity from tanzanite “really comes down to quality of color. Even in the lighter tones and saturations, tanzanite exhibits a brightness to its color. However, iolite usually doesn’t. It exhibits a color that often has some degree of grey masking it.”

Roger Dery, gem cutter and precision faceter at Spectral Gems, said that quality often also is an issue when he’s looking for iolite. Having been to Africa two to four times a year since 2009, he said that while he does see iolite almost every trip, “frequently it is not of a quality that we can use as a custom faceter.”

The gemstone also has strong pleochroism–which means different colors can be seen depending on the direction that the gem is turned–making it a tricky stone to cut for the best color. This can pose challenges to producers and buyers interested in promoting the gem to retailers as an affordable alternative to other similar stones.

But, iolite has been increasing in use a bit over the past few years and could be slightly on the upswing.

“I believe iolite to be a beautiful gem that is grossly underrated,” Dery said.

An open opportunity
Jewelers who have the ability to do custom pieces often may look for gems that aren’t mainstream to set at the center of these designs, and iolite fits into that category very well.

At the same time, the strong color direction in iolite also can be an obstacle for creativity when it comes to cutting the stone in unique designs. With something like a garnet, where the color is the same in all directions, a cutter can get more creative when it comes to creating outside-of-the-box shapes and still retain weight, with yields of more than 30 percent.

However with iolite, due to its unique characteristic, a faceter is lucky to get a 15 percent yield, Dery said.

Yet there remains another area in the chemistry of the stone that could be a positive–it is rarely treated, according to the GIA.

Interestingly, the deep blue hues of some iolite stones are thought to be caused by the same factors that creates the blues in sapphires. Unlike its blue companion, however, iolite can’t be heat treated to help intensify the blue color of the stone since its low melting point won’t allow for the high temperatures needed for the process, the GIA said.

This means that an exceptionally colored iolite likely has the selling point for today’s mindful consumer that it came that way naturally. It also means that pieces that aren’t of fine quality can’t be heat treated to improve their color, limiting supply largely to gem-quality stones that come straight from the earth.

Additionally, iolite is one of the few gemstones that has exceptions when it comes to inclusions and value. Certain types of inclusions in the right orientation can create phenomenal iolite. This is rare and therefore, naturally, coveted by collectors.

One of these is cat’s eye iolite.

The gem also can sometimes contain flat, metallic inclusions, causing a glittery, aventurescent effect in the stone. When the inclusions causing this phenomenon appear in an orange or reddish hue, it can be called “bloodshot” iolite.

Pricing obstacles
In terms of the colored gemstone market, the price of iolite is relatively low, and this affordable price point should help bump its demand.

“Once you get outside of the big three (ruby, sapphire and emerald) and some of the rarities like Paraiba tourmaline, market consumption is not driven by the wealthy, but instead by the middle class,” Robertson said. “This segment is still reactive to price points, which has resulted in a lot of color-substitution based gem purchases in more recent years.”

Dery said that, at trade cost, a dealer can find 3- to 4-carat stones in nicer colors for somewhere in the range of $50 to $75 per carat when it comes from “established cutting centers around the world.” Comparatively, these 3- to 4-carat stones would have sold for about $40 to $55 per carat nearly a decade ago.

North American faceters, however, sell with higher prices because of more exacting standards and a desire for their gems to stand out from the commercial cutting.

Dery said he expects prices to rise another 10 to 15 percent per year in the future.

In his travels to Africa, he said that he has yet to see an iolite mine that had been industrialized. Rather, they are all worked by artisanal miners in groups of anywhere from two to 12.

“These mines are alluvial in nature, and once they hit a certain depth, they are no longer viable to be worked by hand, which will, without any intervention, cause prices to escalate over time.”

In addition to the mining issues that can arise, there also is an increasing interest among a few government mining ministries in Africa to require that gems mined in the country also be cut in the country, instead of exporting the rough at a lower value.

(In 2010, Tanzania implemented such a ban on exporting facetable rough tanzanite weighing more than 1 gram, or roughly 5 carats).

If these movements do come to fruition in the next few years, prices of these gemstones would be greatly affected.

article by Brekan Branstor of National Jeweler Magazine



Posted in Blog, Press | Tagged , , , , , , , , , , , | Comments Off